Connect-Tek USB-8 Specifikace

USB HID SURESWIPE & USB HID SWIPE READER TECHNICAL REFERENCE MANUAL Manual Part Number 99875191 Rev 13 JANUARY 2012 REGISTE

USB HID Swipe Reader 4 SPECIFICATIONS Table 1-1 lists the specifications for the USB Swipe Reader. Figure 1-2 shows the dimensions for the stand

Section 1. Features and Specifications 5 Figure 1-2. Dimensions

USB HID Swipe Reader 6

7 SECTION 2. INSTALLATION This section describes the cable connection, the Windows Plug and Play Setup, and the physical mounting of the unit. USB

USB HID Swipe Reader 8 WINDOWS PLUG AND PLAY SETUP On hosts with the Windows operating system, the first time the device is plugged into a specif

Section 2. Installation 9 Figure 2-2. Mounting Hole Dimensions for Surface 2. Ensure the Reader is positioned on a flat, accessible surface

USB HID Swipe Reader 10

11 SECTION 3. OPERATION This section describes the LED Indicator and Card Read. LED INDICATOR The LED indicator will be either off, red, or green.

USB HID Swipe Reader 12

13 SECTION 4. USB COMMUNICATIONS This device conforms to the USB specification revision 1.1. This device also conforms with the Human Interface De

ii Copyright© 2001-2012 MagTek©, Inc. Printed in the United States of America Information in this document is subject to change without notice. No

USB HID Swipe Reader 14 following table. The usage types are also listed. These usage types are defined in the HID Usage Tables document. Magn

Section 4. USB Communications 15 Item Value (Hex) Usage (Command message) 09 20 Report Count (24) 95 18 Feature (Data, Variable, Absolute, Buff

USB HID Swipe Reader 16 TRACK 3 DECODE STATUS Bits 7-1 0 Value Reserved Error This is a one-byte value, which indicates the status of decoding t

Section 4. USB Communications 17 TRACK DATA If decodable track data exists for a given track, it is located in the track data field that correspo

USB HID Swipe Reader 18 COMMAND NUMBER This one-byte field contains the value of the requested command number. The following table lists all the

Section 4. USB Communications 19 Get Property Request Data: Data Offset Value 0 Property ID Get Property Response Data: Data Offset Value 0 – n

USB HID Swipe Reader 20 last 3 bytes represent the version. For example this string might be “21042812D01”. Examples follow: Example Get SOFTW

Section 4. USB Communications 21 Description: The value is a byte that represents the devices polling interval for the Interrupt In Endpoint. T

USB HID Swipe Reader 22 card data transfer rate decreases the USB bus bandwidth used by the device. The value of this property will be sent to t

Section 4. USB Communications 23 Example Set TRACK ID ENABLE property Request (Hex): Cmd Num Data Len Prp ID Prp Value 01 02 04 95 Example Set T

iii LIMITED WARRANTY MagTek warrants that the products sold pursuant to this Agreement will perform in accordance with MagTek’s published specificati

USB HID Swipe Reader 24 Example Get INTERFACE TYPE property Response (Hex): Result Code Data Len Prp Value 00 01 00 HOST POLL TIMEOUT PROPERTY P

Section 4. USB Communications 25 Example Set HOST POLL TIMEOUT property Response (Hex): Result Code Data Len Data 00 00 Example Get HOST POLL T

USB HID Swipe Reader 26

27 SECTION 5. DEMO PROGRAM The demo program, which is written in Visual Basic, can be used to do the following: • Read cards from the device and v

USB HID Swipe Reader 28 SOURCE CODE Source code is included with the demo program. It can be used as a guide for application development. It i

iv FCC WARNING STATEMENT This equipment has been tested and was found to comply with the limits for a Class B digital device pursuant to Part 15 of

v TABLE OF CONTENTS SECTION 1. FEATURES AND SPECIFICATIONS ... 1

vi Figure 1-1. USB Swipe Reader

1 SECTION 1. FEATURES AND SPECIFICATIONS USB HID SWIPE READER The USB (Universal Serial Bus) HID (Human Interface Device) Swipe Reader is a compact

USB HID Swipe Reader 2 FEATURES Major features of the Swipe Reader are as follows: • Powered through the USB – no external power supply require

Section 1. Features and Specifications 3 The hardware configurations for the USB HID SureSwipe are as follows: Part Number Tracks Color Cable Hea