Connect-Tek USB-2 Specifikace Strana 381

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 441
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 380
Commands Listed in Alphabetical Order
Arguments
RI species sig
ned integer data point representation.
RP species positive integer data point representation.
Examples
WFMOUTPRE:BN_FMT RP species that outgoing waveform data will be in positive
integer format.
WFMOUTPRE:BN_FMT? might return :WFM OUTPRE:BN_FMT RI indicating that
the outgoing waveform data is currently in signed integer format.
WFMOutpre:BYT_Nr
Sets or returns the data width for the outgoing waveform specied by the
DATa:SOUrce command. Changing WFMOutpre:BYT_Nr also changes
WFMOutpre:BIT_Nr and DATa:WIDth.
Group
Waveform Transfer
Syntax
WFMOutpre:BYT_Nr <NR1>
WFMOutpre:BYT_Nr?
Related Commands
DATa:SOUrce, DATa:WIDth, WFMOutpre:BIT_Nr
Arguments
<NR1> is the number of bytes per data point and can be 1 or 2.
Examples
WFMOUTPRE:BYT_NR 1 sets the number of bytes per outgoing waveform d ata
point to 1, which is the default setting.
WFMOUTPRE:BYT_NR? might return :WFMOUTPRE:BYT_NR 2 indicating that
there are 2 bytes per outgoing waveform data point.
WFMOutpre:BYT_Or
Sets or returns which byte of binary waveform data is transmitted rst, during
a waveform data transfer, when data points require than one byte. This
specication only has mean ing when WFMOutpre:ENCdg is set to BIN and
WFMOutpre:BYT_Nr is 2. Changing WFMInpre:FILTERFreq also changes
DATa:ENCdg (if DATa:ENCdg is not ASCIi).
Group
Waveform Transfer
MSO2000B, DPO2000B, MSO2000 and DPO2000 Series Oscilloscopes Programmer Manual 2-365
Zobrazit stránku 380
1 2 ... 376 377 378 379 380 381 382 383 384 385 386 ... 440 441

Komentáře k této Příručce

Žádné komentáře