Connect-Tek Transa PRO 17 Manuál s instrukcemi stáhnout pdf (Strana 121)

Keypad lock is local to each display and must be set to Locked in order to

isplay Address(section 4.2.6.4)

y to a

5.3.4.17. Change Security Code (section 4.2.6.5)

ecurity code using 1 through 4 keys.

protect the keypad from changes. Each display must be either Locked o

Unlocked individually.

5.3.4.16. D

Each display must have its own address on the LAN. Set each displa

different number.

Set the 8-digit s

Display Setup

The user requires that the displays show only the displacement (normalized input

5.3 2(section 4.2.10.1.1)

5.3

sly).

.3.5. TACHTROL 30 Programming & Setup (Speed)

figured to

and wants the backlight to stay on. Navigate to Display / Keypad Setup.

.4.18. Display Line 1 &

Set Line 1 to Input A, Line 2 to Off.

.4.19. Backlight Timeout (section 4.2.10.1.2)

Set Timeout to Off (will stay on continuou

5.3.4.20. Contrast (section 4.2.10.1.3)

Contrast = 70

This instrument will be set to run in Tachometer mode and con

monitor and report on the linear speed of the stage. Since the stage will be

moving in two directions, direction mode will be employed to track the speed

in both the forward and reverse motion of the stage. Programming can be

accomplished either through the TT display or TACHLINK.

Input Setup

5.3.5.1. Tachometer Mode (section 4.2.2)

All setup will be performed in Tachometer mode.

.3.5.2. Direction (section 4.2.2.1) 5

109

1 2 ... 116 117 118 119 120 121 122 123 124 125 126 ... 132 133

Žádné komentáře

Connect-Tek Transa PRO 17 Manuál s instrukcemi Strana 121